Godox X1N TTL Wireless Transmitter& Receiver for Nikon:
Godox first TTL wireless flash trigger X1N applies to Nikon DSLR cameras. Featuring multi-channel triggering, stable signal transmission, and sensitive reaction, it can be used to trigger camera shutter, studio flash and camera flash. X1N is compatible with market-available cameras which support i-TTL.
-With 2.4G wireless transmission system, X1N (for Nikon) can be used to trigger camera flash, studio flash and camera shutter over 100 meters’ distance.
-Fully support TTL functions, support for i-TTL autoflash, manual flash, 1/8000 high-speed sync, flash exposure compensation, flash exposure lock, modeling flash, etc.
-With wireless grouping system (max. 5 groups & 32 channels) to satisfy various shooting requirements.
-Both transmitter and receiver equip with big LCD panel to offer convenient operation.
-Other functions satisfy various requirements, such as Delay Set, Wireless Shutter Release, Zoom Setting, etc.
-Transmitter use a PC port to input and output, receiver use a 2.5mm sync cable to output.
-Use the Micro USB port to firmware upgrade.
-Settings will be stored 2 seconds after last operation and recover after a restart.
Type For Nikon
Compatible with Nikon DSLR cameras(i-TTL autoflash)
Support all cameras that have PC sync socket
Build-in Remote System 2.4 G wireless transmission
Power Supply 2*AA batteries
Manual Flash Yes
TTL Auto Flash i-TTL
High Speed Sync (HSS) Yes
Flash Exposure Compensation (FEC) Yes, ±3 stops 1/3 stop increments
Focus Assist Manual open
Rear Curtain Sync No
Modeling Flash Yes, fired with cameras depth of field preview button
Wireless Function in TTL mode, Ratio off
in M mode, Flash Ratio(A B C)
Support GR (grouping flash)
Controlled Slave Groups in the GR grouping mode, 5 (A/B/C/D/E)
in the Ratio grouping mode, 3(A/B/C)
Transmitter Distance >100 meters
Channel 32 channels
Synchronization Delay Set Support (0-10ms, set in unit of 100us )
Wireless Shutter Release Receiver can control cameras shooting through 2.5mm shutter release interface
Zoom Setting The focal length can be adjusted through the transmitter
Display Panel Wide LCD panel, backlight on/off
Transmitter: use a PC port to input and output;
Receiver: use a 2.5mm sync cable to output
Use the Micro USB port to upgrade
Settings will be stored 2 seconds after last operation and recover after a restart
Package Size/ Weight
1 x X1T-N Wireless Transmitter for Nikon
1 x X1R-N Wireless Receiver for Nikon